How to Use an RV Sewer Hose

0
187

Dumping your RV’s holding tanks is a necessary evil of RV ownership. But with the right tools and a little bit of know-how, it doesn’t have to be a difficult or messy task. In this article, we’ll show you how to use an RV sewer hose to empty your tanks quickly and easily.

  1. Choose the Right Hose 

RV sewer hoses are typically made of PVC or plastic and are available in a variety of lengths. It’s important to choose a hose that is long enough to reach from your RV’s holding tank to the dump station, but not so long that it’s difficult to handle.

  1. Connect the Hose to the RV 

Once you have the right hose, it’s time to connect it to your RV. Most RVs have a dedicated connection point for the sewer hose, usually located near the rear of the vehicle. If your RV doesn’t have a dedicated connection point, you can simply attach the hose to the RV’s sewer outlet.

  1. Connect the Hose to the Dump Station 

The next step is to connect the other end of the hose to the dump station. Most dump stations have a standard 3-inch connection, so you’ll need to find an adapter that fits your hose. Once the adapter is in place, simply connect the hose and tighten the connection.

  1. Open the Valves 

With the hose connected, it’s time to open the valves and start dumping. On most RVs, two valves need to be opened: the black water valve and the gray water valve. The black water valve is located near the toilet and is used to empty the holding tank that contains human waste. The gray water valve is located near the sinks and is used to empty the holding tank that contains water from the sinks and showers. 

  1. Empty the Tanks 

Once the valves are open, the tanks will start to empty. Depending on the size of your tanks, it may take a few minutes or up to an hour to empty them. Once the tanks are empty, close the valves and disconnect the hose.

  1. Rinse the Hose 

It’s important to rinse the hose off after each use to prevent the buildup of odor-causing bacteria. To do this, simply run some water through the hose until it is completely clear.

  1. Store the Hose 

Once the hose is rinsed, it’s time to store it until next time. If you have a storage compartment in your RV, this is the ideal place to keep the hose. If you don’t have a dedicated storage spot, you can simply coil the hose and store it in a bag or container. For more detail you need, click here https://theroadtripster.com/rv-tips/how-to-clean-rv-sewer-hose/

 

  1. Dispose of the Waste 

Most RV parks and campgrounds have dump stations that are specifically designed for this purpose. Simply drive your RV to the dump station and empty the tanks there.

  1. Clean the Tanks 

Once the tanks are emptied, it’s important to clean them out to prevent the buildup of odor-causing bacteria. To do this, simply add some water to the tanks and then run the RV’s flush system. This will clean out the tanks and prepare them for next use.

 

Comments are closed.